| Number |
2010-0235R1 |
| Issued by |
 Europe |
| Issue date |
2011-05-23 |
| Effective date |
2011-06-06 |
| EASA approval number |
|
| ATA Chapter |
52 |
Approval Holder
/ Type Designation |
-
DIAMOND AIRCRAFT INDUSTRIES
-
DA 42
-
DA 42
-
DA 42 M
-
DA 42 M-NG
-
DA 42 NG
-
DIAMOND AIRCRAFT INDUSTRIES, INC.
|
| Revision |
This AD revises EASA AD 2010-0235 dated 10 November 2010.
This AD has been revised to specify that the use of the latest revision of the
applicable AFM, if properly revised, is acceptable to comply with the AFM
update requirements of this AD.
|
| Correction |
Not applicable
|
| Supersedure |
None
|
| Publication(s) and related information |
Diamond Aircraft Industries GmbH Mandatory Service Bulletins:
MSB 40-070, MSB D4-079 and MSB F4-024 dated 30 April 2010 (single
document) and the associated Work Instructions.
MSB 42-083 and MSB 42NG-014 dated 13 July 2010 (single document) and
the associated Work Instructions.
Diamond Aircraft Industries GmbH Airplane Flight Manuals:
AFM 6.01.01 for DA 40 aeroplanes.
AFM 6.01.02 for DA 40 F aeroplanes.
AFM 6.01.05 for DA 40 D aeroplanes.
AFM 7.01.05 for DA 42 and DA 42 M aeroplanes.
AFM 7.01.06 for DA 42 and DA 42 M aeroplanes with GFC 700 Autopilot.
AFM 7.01.15 Revision 2 dated 30 November 2009, for DA 42 NG and DA 42
M-NG aeroplanes.
The use of later approved revisions of these documents is acceptable for
compliance with the requirements of this AD. |
| PAD number |
10-102 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve
Alternative Methods of Compliance for this AD.
2. The original issue of this AD was posted on 21 September 2010 as PAD
10-102 for consultation until 19 October 2010. No comments were
received during the consultation period.
3. Enquiries regarding this AD should be referred to the Airworthiness
Directives, Safety Management & Research Section, Certification
Directorate, EASA; E-mail ADs[at]easa.europa[dot]eu.
|
