Safety Publications Tool

2012-0126R1 : Fire Protection – Engine and Auxiliary Power Unit Automatic Fire Extinguishers – Inspection / Overhaul

Number 2012-0126R1
Issued by Europe  Europe
Issue date 2012-09-10
Effective date 2012-09-17
EASA approval number
ATA Chapter 26
Approval Holder
/ Type Designation
  • BAE SYSTEMS (OPERATIONS) LTD
    • AVRO146RJ
      • 100
      • 100A
      • 115
      • 70
      • 70A
      • 85
      • 85A
    • BAE146
      • 100
      • 100A
      • 200
      • 200A
      • 300
      • 300A
Revision This AD revises EASA AD 2012-0126 dated 10 July 2012.Revision 1 of this AD is issued to clarify that new extinguishers P/N 57333 may be fitted with no additional inspection required by this AD.
Correction Not applicable
Supersedure None
Publication(s) and related information BAE Systems (Operations) Limited ISB.26-078 Initial Issue dated 21 September 2011. Kidde Graviner SB 26-080 Revision 1 dated 27 July 2011. Kidde Graviner SIL 01-10 dated 29 July 2010. Kidde Graviner CMM 26-21-40 at Revision 14. The use of later approved revisions of these documents is acceptable for compliance with the requirements of this AD.
PAD number 12-048R1
Remarks 1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. The original issue of this AD was posted on 30 May 2012 as PAD 12- 048R1 for consultation until 27 June 2012. The Comment Response Document can be found at https://ad.easa.europa.eu. 3. Enquiries regarding this AD should be referred to the Safety Information Section, Certification Directorate, EASA. E-mail ADs[at]easa.europa[dot]eu.