| Number |
2014-0197R1 |
| Issued by |
 Europe |
| Issue date |
2019-07-11 |
| Effective date |
2019-07-18 |
| EASA approval number |
|
| ATA Chapter |
53 |
Approval Holder
/ Type Designation |
|
| Revision |
This AD revises EASA AD 2014-0197 dated 04 September 2014.
|
| Correction |
Not applicable
|
| Supersedure |
None
|
| Publication(s) and related information |
Airbus Inspection SB:
Airbus SB A330-53-3202 original issue dated 06 May 2014.
Airbus SB A330-53-3212 original issue dated 06 May 2014.
Airbus SB A330-53-3213 original issue dated 06 May 2014.
Airbus SB A330-53-3214 original issue dated 06 May 2014.
Airbus Modification SB:
Airbus SB A330-53-3216 original issue dated 06 May 2014.
Airbus SB A330-53-3217 original issue dated 06 May 2014.
Airbus SB A330-53-3218 original issue dated 06 May 2014.
Airbus SB A330-53-3219 original issue dated 06 May 2014.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| PAD number |
14-115 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. The original issue of this AD was posted on 08 July 2014 as PAD 14-115 for consultation until 05 August 2014. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
