Number |
2018-0043R1 |
Issued by |
Europe |
Issue date |
2019-12-12 |
Effective date |
2019-12-19 |
EASA approval number |
|
Contributor |
EASA Large Aeroplanes Department |
ATA Chapter |
71 |
Approval Holder / Type Designation |
|
Revision |
This AD revises EASA AD 2018-0043 dated 14 February 2018.
|
Correction |
Not applicable
|
Supersedure |
None
|
Publication(s) and related information |
Airbus SB A380-71-8013 original issue dated 08 June 2017, or Revision 1 dated 22 October 2019.
Airbus A380 NTM Revision 35 dated 01 September 2013.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
PAD number |
17-073R2 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. The original issue of this AD was posted on 13 June 2017 as PAD 17-073 for consultation until
11 July 2017, republished on 22 August 2017 as PAD 17-073R1 for consultation until
05 September 2017, and republished on 14 December 2017 as PAD 17-073R2 for consultation
until 28 December 2017. The Comment Response Documents can be found in the EASA Safety
Publications Tool, in the compressed (zipped) file attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued
Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system.
|