Safety Publications Tool

2018-0135R1 : SUPERSEDED BY EASA AD 2022-0204

Number 2018-0135R1
Issued by Europe  Europe
Issue date 2018-07-06
Effective date 2018-07-10
EASA approval number
ATA Chapter 32
Approval Holder
/ Type Designation
  • AIRBUS S.A.S.
    • A318
      • A318-111
      • A318-112
      • A318-121
      • A318-122
    • A319
      • A319-111
      • A319-112
      • A319-113
      • A319-114
      • A319-115
      • A319-131
      • A319-132
      • A319-133
    • A320
      • A320-211
      • A320-212
      • A320-214
      • A320-215
      • A320-216
      • A320-231
      • A320-232
      • A320-233
    • A321
      • A321-111
      • A321-112
      • A321-131
      • A321-211
      • A321-212
      • A321-213
      • A321-231
      • A321-232
Revision This AD revises EASA AD 2018-0135 dated 26 June 2018.
Correction Not applicable
Supersedure The original issue of this AD superseded DGAC France AD F-2005-115 (EASA approval 2005-6032) dated 06 July 2005, and EASA AD 2014-0058 dated 11 March 2014.
Publication(s) and related information Airbus SB A320-32-1441, original issue dated 28 December 2016, or Revision 01 dated 14 December 2017. Airbus SB A320-32-1416 original issue dated 10 March 2014. Safran SB 200-32-321 original issue dated 09 September 2015, or Revision 01 dated 01 November 2016, or Revision 02 dated 03 October 2017. Safran SB 201-32-68 original issue dated 09 September 2015, or Revision 01 dated 01 November 2016, or Revision 02 dated 03 October 2017. Safran SB 200-32-286 original issue dated 03 September 2004, or Revision 01 dated 01 May 2005, or Revision 02 dated 15 June 2007, or Revision 03 dated 03 October 2008. Safran SB 201-32-43 original issue dated 03 September 2004, or Revision 01 dated 01 May 2005, or Revision 02 dated 15 June 2007, or Revision 03 dated 03 October 2008. Safran SB 200-32-313 original issue dated 25 February 2013. Safran SB 201-32-62 original issue dated 25 February 2013. The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD.
PAD number 18-063
Remarks 1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. The original issue of this AD was posted on 12 April 2018 as PAD 18-063 for consultation until 18 May 2018. The Comment Response Document can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.