Safety Publications Tool

2018-0148R1 : SUPERSEDED BY EASA AD 2022-0222

Number 2018-0148R1
Issued by Europe  Europe
Issue date 2019-04-05
Effective date 2019-04-12
EASA approval number
ATA Chapter 78
Approval Holder
/ Type Designation
  • AIRBUS S.A.S.
    • A330
      • A330-243
      • A330-243F
      • A330-341
      • A330-342
      • A330-343
Revision This AD revises EASA AD 2018-0148 dated 13 July 2018.
Correction Not applicable
Supersedure None
Publication(s) and related information Airbus SB A330-78-3023 original issue dated 12 December 2017. Rolls Royce NMSB RB211-78-AH677 original issue dated 18 December 2017. Safran Nacelles SB 78-AH677 dated 18 December 2017. The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD.
PAD number 19-036
Remarks 1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. This revised AD was posted on 08 March 2019 as PAD 19-036 for consultation until 22 March 2019. The Comment Response Document can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD. The original issue of this AD was posted on 20 April 2018 as PAD 18-056 for consultation until 18 May 2018. The Comment Response Document can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD. 3. Enquiries regarding this AD should be referred to the EASA Programming & Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs@easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.