Number |
2018-0149-E |
Issued by |
Europe |
Issue date |
2018-07-13 |
Effective date |
2018-07-17 |
EASA approval number |
|
Contributor |
EASA Rotorcraft Section |
ATA Chapter |
24 |
Approval Holder / Type Designation |
-
LEONARDO S.p.A. HELICOPTERS
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2018-0120-E dated 29 May 2018.
|
Publication(s) and related information |
Leonardo S.p.A. Helicopters SB 109S-079 original issue dated 28 May 2018, or Revision A dated 04 June 2018.
Leonardo S.p.A. Helicopters SB 109S-081 original issue dated 05 July 2018.
Leonardo S.p.A. Helicopters SB 109SP-120 original issue dated 28 May 2018, or Revision A dated 04 June 2018.
Leonardo S.p.A. Helicopters SB 109SP-122 original issue dated 05 July 2018.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. The results of the safety assessment have indicated the need for immediate publication and
notification, without the full consultation process.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|