Safety Publications Tool

2018-0178 : Hydraulic System / Fuel Tank Inerting System – Engine Driven Pump Rapid Overheat – Master Minimum Equipment List Restriction / Software Update / Modification

Number 2018-0178
Issued by Europe  Europe
Issue date 2018-08-23
Effective date 2018-09-06
EASA approval number
ATA Chapter 29, 47
Approval Holder
/ Type Designation
  • AIRBUS S.A.S.
    • A350
      • A350-941
Revision Not applicable
Correction Not applicable
Supersedure This AD supersedes EASA AD 2017-0200 dated 10 October 2017.
Publication(s) and related information Airbus A350 MMEL MER dated 21 August 2017, EASA approval reference D17028232. Airbus A350 MMEL MER dated 06 September 2017, EASA approval reference D17029962, which is available at AirbusWorld. Airbus Flight Operation Transmission 999.0068/17 Revision 01, dated 06 September 2017. Airbus A350 SB A350-29-P012 original issue, dated 06 October 2017. Airbus A350 SB A350-29-P013 original issue, dated 12 March 2018. Airbus A350 MMEL Major Change V29ME1734973 dated 30 January 2018, approved by EASA under reference 10064381. Airbus A350 MMEL Minor Change V29ME1732522 dated 3 January 2018, approved by Airbus under Design Organisation Approval number EASA.21J.031. The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD.
PAD number 18-113
Remarks 1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. This AD was posted on 03 August 2018 as PAD 18-113 for consultation until 10 August 2018. The Comment Response Document can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.