| Number |
2018-0200 |
| Issued by |
 Europe |
| Issue date |
2018-09-06 |
| Effective date |
2018-09-20 |
| EASA approval number |
|
| ATA Chapter |
24 |
Approval Holder
/ Type Designation |
-
AIRBUS S.A.S.
-
A320
-
A320-211
-
A320-212
-
A320-231
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes DGAC France AD 91-182-020(B) R2 dated 07 December 1994.
|
| Publication(s) and related information |
Airbus SB A320-24-1044 Rev. 2 dated 30 March 1992, or Rev. 3 dated 12 March 1993.
Airbus SB A320-24-1045 Rev. 1 dated 23 August 1991, or Rev. 2 dated 12 April 1992, or Rev. 3 dated
10 June 1993, or Rev. 4 dated 29 December 1994.
Airbus SB A320-92-1115 original issue dated 11 April 2017, or Rev. 1 dated 14 August 2018.
Airbus TA 80378898/008/2017 issue 1 dated 16 November 2017.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
| PAD number |
18-082 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. This AD was posted on 18 June 2018 as PAD 18-082 for consultation until 16 July 2018. The
Comment Response Document can be found in the EASA Safety Publications Tool, in the
compressed (zipped) file attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the Safety Information Section, Certification Directorate, EASA. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
