Number |
2018-0203 |
Issued by |
Europe |
Issue date |
2018-09-12 |
Effective date |
2018-09-26 |
EASA approval number |
|
Contributor |
EASA Rotorcraft Section |
ATA Chapter |
67 |
Approval Holder / Type Designation |
-
LEONARDO S.p.A. HELICOPTERS
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2017-0137 dated 01 August 2017.
|
Publication(s) and related information |
Leonardo S.p.A. SB 169-057 original issue, dated 26 July 2017.
Leonardo S.p.A. SB 169-082 Revision A, dated 03 August 2018.
Leonardo S.p.A. AW169-AMPI Issue 17, dated 01 August 2018.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
PAD number |
18-115 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 10 August 2018 as PAD 18-115 for consultation until 07 September 2018. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|