| Number |
2018-0219 |
| Issued by |
 Europe |
| Issue date |
2018-10-12 |
| Effective date |
2018-10-26 |
| EASA approval number |
|
| Contributor |
EASA General Aviation Section |
| ATA Chapter |
27 |
Approval Holder
/ Type Designation |
-
M&D FLUGZEUGBAU
-
AVO 68 (Samburo)
-
AVO 68-R
-
AVO 68-R 100
-
AVO 68-R 115
-
AVO 68-s
-
AVO 68-v
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes German Luftfahrt-Bundesamt (LBA) Lufttuechtigkeitsanweisung (LTA) AD 2001-371/2 dated 02 May 2002.
|
| Publication(s) and related information |
M&D Flugzeugbau GmbH MSB 808-18 Revision 04 dated 10 October 2018.
The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD. |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
