Safety Publications Tool

2018-0228 : Power Plant – Engine Air Inlet Cowl Inner Barrel Lower Panels – Inspection / Replacement

Number 2018-0228
Issued by Europe  Europe
Issue date 2018-10-22
Effective date 2018-11-05
EASA approval number
ATA Chapter 71
Approval Holder
/ Type Designation
  • AIRBUS S.A.S.
    • A330
      • A330-201
      • A330-202
      • A330-203
      • A330-301
      • A330-302
      • A330-303
Revision Not applicable
Correction Not applicable
Supersedure None
Publication(s) and related information Airbus SB A330-71-3035 original issue dated 20 February 2018. Airbus SB A330-71-3036 original issue dated 20 February 2018. Goodrich Aerospace SB CF6-80E1-NAC-71-048 Revision 1 dated 26 August 2015, or Revision 2 dated 25 February 2016. Goodrich Aerospace SB CF6-80E1-NAC-71-052 original issue dated 10 February 2016. The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD.
PAD number 18-040R1
Remarks 1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. This AD was posted on 16 March 2018 as PAD 18-040 for consultation until 13 April 2018, and republished on 26 September 2018 as PAD 18-040R1 for additional consultation until 10 October 2018. The Comment Response Documents can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.