| Number |
2018-0263 |
| Issued by |
 Europe |
| Issue date |
2018-12-07 |
| Effective date |
2018-12-21 |
| EASA approval number |
|
| ATA Chapter |
05, 63 |
Approval Holder
/ Type Designation |
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2018-0052 dated 02 March 2018.
|
| Publication(s) and related information |
AH ASB EC155-05A034 original issue dated 13 June 2017, or Revision 1 dated 30 June 2017, or Revision 2 dated 14 November 2017, or Revision 3 dated 02 March 2018, or Revision 4 dated 13 July 2018, or Revision 5 dated 04 December 2018.
AH SB EC155-63-016 Revision 2 dated 14 November 2017, or Revision 3 dated 02 March 2018.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
