| Number |
2018-0264R1 |
| Issued by |
 Europe |
| Issue date |
2019-04-04 |
| Effective date |
2019-04-04 |
| EASA approval number |
|
| ATA Chapter |
25 |
Approval Holder
/ Type Designation |
-
APPLIANCES
-
ATA 25 EQUIPMENT / FURNISHINGS
|
| Revision |
This AD revises EASA AD 2018-0264 dated 07 December 2018.
|
| Correction |
Not applicable
|
| Supersedure |
None
|
| Publication(s) and related information |
Aviointeriors SB 16/18 original issue dated 02 July 2018, or rev. 1 dated 11 October 2018.
Aviointeriors SB 18/18 original issue dated 30 July 2018, or rev. 1 dated 16 October 2018, or rev. 2 dated 11 March 2019.
Aviointeriors CMM 25-26-59 Revision C.
Aviointeriors CMM 25-26-82 Revision D.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
| PAD number |
18-149 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. The original issue of this AD was posted on 07 November 2018 as PAD 18-149 for consultation until 05 December 2018. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued
Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
