Safety Publications Tool

2018-0286 : Main Rotor – Hydraulic Damper / Belt Tension Shaft Rod End Assembly – Inspection

Number 2018-0286
Issued by Europe  Europe
Issue date 2018-12-20
Effective date 2019-01-03
EASA approval number
ATA Chapter 62
Approval Holder
/ Type Designation
  • ENSTROM HELICOPTER CORPORATION
    • 280
      • 280
      • 280C
      • 280F
      • 280FX
    • 480
      • 480
      • 480B
    • F-28
      • F-28A
      • F-28C
      • F-28C-2
      • F-28F
      • F-28F-R
Revision Not applicable
Correction Not applicable
Supersedure This AD supersedes EASA AD 2018-0067 dated 23 March 2018.
Publication(s) and related information Enstrom Helicopter Corporation SDB 0127 Revision 1 dated 06 October 2017, or Revision 2 dated 20 June 2018. Enstrom Helicopter Corporation SDB T-058 dated 02 August 2017, or Revision 1 dated 20 June 2018.
PAD number 18-150
Remarks 1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. This AD was posted on 08 November 2018 as PAD 18-150 for consultation until 06 December 2018. No comments were received during the consultation period. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.