Number |
2019-0089 |
Issued by |
Europe |
Issue date |
2019-04-25 |
Effective date |
2019-05-09 |
EASA approval number |
|
ATA Chapter |
76 |
Approval Holder / Type Designation |
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2018-0075 dated 05 April 2018.
|
Publication(s) and related information |
GE Aviation Czech SB-H80-76-00-00-0036 Revision 02 dated 29 March 2018, and Revision 03 dated
12 April 2019.
GE Aviation Czech ASB-H80-76-00-00-0048, ASB-H85-76-00-00-0015 (single document), original
issue dated 29 March 2019, and Revision 01 dated 12 April 2019.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD
with Request for Comments, postponing the public consultation process until after publication.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued
Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system.
|