| Number |
2019-0090 |
| Issued by |
 Europe |
| Issue date |
2019-04-26 |
| Effective date |
2019-05-10 |
| EASA approval number |
|
| ATA Chapter |
05 |
Approval Holder
/ Type Designation |
-
AIRBUS S.A.S.
-
A300-600
-
A300B4-601
-
A300B4-603
-
A300B4-605R
-
A300B4-620
-
A300B4-622
-
A300B4-622R
-
A300C4-605R variant F
-
A300C4-620
-
A300F4-605R
-
A300F4-622R
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2017-0205 dated 12 October 2017.
|
| Publication(s) and related information |
Airbus A300-600 ALS Part 2 Revision 02 dated 28 August 2017, and Revision 03 dated 14 December
2018.
The use of later approved variations or revisions of the above-mentioned documents is acceptable
for compliance with the requirements of this AD. |
| PAD number |
19-045 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. This AD was posted on 26 March 2019 as PAD 19-045 for consultation until 23 April 2019. No
comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued
Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system.
|
