| Number |
2019-0127 |
| Issued by |
 Europe |
| Issue date |
2019-06-05 |
| Effective date |
2019-06-19 |
| EASA approval number |
|
| ATA Chapter |
57 |
Approval Holder
/ Type Designation |
-
AIRBUS S.A.S.
-
A380
-
A380-841
-
A380-842
-
A380-861
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2016-0189 dated 26 September 2016.
|
| Publication(s) and related information |
Airbus SB A380-57-8122 original issue dated 26 February 2016, or Revision 01 dated 22 July 2016, or Revision 02 dated 04 February 2019.
Airbus SB A380-57-8123 original issue dated 26 February 2016, or Revision 01 dated 22 July 2016, or Revision 02 dated 04 February 2019.
Airbus SB A380-57-8193 original issue dated 28 February 2019.
Airbus SB A380-57-8194 original issue dated 28 February 2019.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| PAD number |
19-060 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 11 April 2019 as PAD 19-060 for consultation until 09 May 2019. The Comment Response Document can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
