Number |
2019-0137 |
Issued by |
Europe |
Issue date |
2019-06-12 |
Effective date |
2019-06-26 |
EASA approval number |
|
Contributor |
EASA Propulsion Section |
ATA Chapter |
72 |
Approval Holder / Type Designation |
-
CFM INTERNATIONAL
-
LEAP-1B
-
LEAP-1B21
-
LEAP-1B23
-
LEAP-1B25
-
LEAP-1B27
-
LEAP-1B28
-
LEAP-1B28B1
-
LEAP-1B28B2
-
LEAP-1B28B2C
-
LEAP-1B28B3
-
LEAP-1B28BBJ1
-
LEAP-1B28BBJ2
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
None
|
Publication(s) and related information |
CFMI SB LEAP-1B-72-00-0222-01A-930A-D issue 001 dated 26 October 2018, or issue 002 dated 19 December 2018, or issue 003 dated 21 January 2019, or issue 004 dated 01 February 2019, or issue 005 dated 13 February 2019, or issue 006 dated 22 March 2019, or issue 007 dated 17 May 2019.
CFMI SB LEAP-1B-72-00-0256-01A-930A-D issue 001 dated 22 March 2019, or issue 002 dated 06 May 2019, or issue 003 dated 17 May 2019.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|