Number |
2019-0170R1 |
Issued by |
Europe |
Issue date |
2020-05-15 |
Effective date |
2020-05-22 |
EASA approval number |
|
Contributor |
EASA Large Aeroplanes Department |
ATA Chapter |
53 |
Approval Holder / Type Designation |
-
AIRBUS S.A.S.
-
A380
-
A380-841
-
A380-842
-
A380-861
|
Revision |
This AD revises EASA AD 2019-0170 dated 17 July 2019.
|
Correction |
Not applicable
|
Supersedure |
None
|
Publication(s) and related information |
Airbus SB A380-53-8163 original issue dated 28 January 2019.
Airbus SB A380-53-8166 original issue dated 01 July 2019.
Airbus SB A380-53-8170 original issue dated 30 April 2020.
Airbus A380 SRM, Chapter 53-35-20 at Revision 56, dated June 2018.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
PAD number |
19-095 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. The original issue of this AD was posted on 27 May 2019 as PAD 19-095 for consultation until 24 June 2019. The Comment Response Document can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|