| Number |
2019-0195 |
| Issued by |
 Europe |
| Issue date |
2019-08-13 |
| Effective date |
2019-08-27 |
| EASA approval number |
|
| ATA Chapter |
64 |
Approval Holder
/ Type Designation |
-
AIRBUS HELICOPTERS
-
SA 330 / AS 332 / EC 225
-
AS 332 C
-
AS 332 C1
-
AS 332 L
-
AS 332 L1
-
SA 330 J
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2018-0248 dated 15 November 2018.
|
| Publication(s) and related information |
AH ASB AS332-05.01.10 original issue dated 25 October 2018, or Revision 1 dated 16 July 2019.
AH ASB SA330-05.105 original issue dated 25 October 2018, or Revision 1 dated 16 July 2019.
AH ASB AS332-64.00.44 original issue dated 16 July 2019.
AH ASB SA330-65.135 original issue dated 16 July 2019.
AH ASB SA330-65.132 original issue dated 12 February 2018, or Revision 1 dated 25 October 2018, or Revision 2 dated 16 July 2019.
AH ASB AS332-64.00.43 original issue dated 21 November 2017, or Revision 1 dated 12 February 2018, or Revision 2 dated 25 October 2018, or Revision 3 dated 16 July 2019.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| PAD number |
19-132 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 19 July 2019 as PAD 19-132 for consultation until 09 August 2019. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
