| Number |
2019-0230 |
| Issued by |
 Europe |
| Issue date |
2019-09-20 |
| Effective date |
2019-09-26 |
| EASA approval number |
|
| ATA Chapter |
72 |
Approval Holder
/ Type Designation |
-
ROLLS-ROYCE DEUTSCHLAND Ltd & Co KG
|
| Revision |
Not applicable
|
| Correction |
This AD is republished to correct the current design approval holder's name.
|
| Supersedure |
This AD supersedes EASA AD 2018-0199 dated 06 September 2018, including its Correction dated 26 September 2018.
|
| Publication(s) and related information |
Rolls-Royce Trent 900 NMSB RB.211-72-AJ868 original issue dated 18 July 2018, and Revision 1 dated 23 August 2019.
Rolls-Royce Trent 900 SB RB.211-72-J395 original issue dated 20 April 2017.
Rolls-Royce Trent 900 SB RB.211-72-J589 Revision 1 dated 29 January 2019.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| PAD number |
19-136 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 23 July 2019 as PAD 19-136 for consultation until 20 August 2019. The Comment Response Document can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
