| Number |
2019-0251 |
| Issued by |
 Europe |
| Issue date |
2019-10-09 |
| Effective date |
2019-10-16 |
| EASA approval number |
|
| ATA Chapter |
36 |
Approval Holder
/ Type Designation |
-
AIRBUS S.A.S.
-
A380
-
A380-841
-
A380-842
-
A380-861
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD cancels EASA AD 2017-0135 dated 28 July 2017, EASA Emergency AD 2018-0171-E dated 06 August 2018, and supersedes EASA AD 2019-0205 dated 20 August 2019.
|
| Publication(s) and related information |
Airbus A380 AFM TR 206 issue 1 dated 19 February 2019.
Airbus SB A380-36-8062 original issue dated 23 August 2019.
Airbus AOT A36R002-19 original issue dated 26 June 2019.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| PAD number |
19-163R1 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was published on 29 August 2019 as PAD 19-163 for consultation until 12 September 2019 and republished on 18 September 2019 as PAD 19-163R1 for additional consultation until 02 October 2019. The Comment Response Documents can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
