Number |
2019-0302 |
Issued by |
Europe |
Issue date |
2019-12-13 |
Effective date |
2019-12-27 |
EASA approval number |
|
Contributor |
EASA General Aviation Department |
ATA Chapter |
27 |
Approval Holder / Type Designation |
-
DIAMOND AIRCRAFT INDUSTRIES
-
DA 42
-
DA 42
-
DA 42 M
-
DA 42 M-NG
-
DA 42 NG
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
None
|
Publication(s) and related information |
DAI MSB 42-137 and MSB 42NG-079 (published as a single document) original issue dated 21 October 2019, or Revision 1 (MSB 42-137/1 and MSB 42NG-079/1, respectively) dated
11 December 2019.
DAI RSB 42-139 and RSB 42NG-081 (published as a single document) original issue dated 21 October 2019.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. This AD was posted as PAD 19-199 on 07 November 2019 for consultation until 05 December 2019. The Comment Response Document can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|