Number |
2020-0008 |
Issued by |
Europe |
Issue date |
2020-01-20 |
Effective date |
2020-02-03 |
EASA approval number |
|
Contributor |
EASA General Aviation Department |
ATA Chapter |
27 |
Approval Holder / Type Designation |
-
DIAMOND AIRCRAFT INDUSTRIES
-
DA 42
-
DA 42
-
DA 42 M
-
DA 42 M-NG
-
DA 42 NG
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2017-0074 dated 28 April 2017.
|
Publication(s) and related information |
DAI MSB 42-126 / 42NG-066 original issue dated 27 March 2017, or MSB 42-126/1 / 42NG-066/1 (published as a single document) Revision 1 dated 14 November 2019.
The use of later approved revisions of the above-mentioned document is acceptable for
compliance with the requirements of this AD. |
PAD number |
19-204 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 15 November 2019 as PAD 19-204 for consultation until 12 December 2019. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|