Number |
2020-0048 |
Issued by |
Europe |
Issue date |
2020-03-06 |
Effective date |
2020-03-20 |
EASA approval number |
|
Contributor |
EASA VTOL Department |
ATA Chapter |
64 |
Approval Holder / Type Designation |
-
LEONARDO S.p.A. HELICOPTERS
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2019-0193 dated 07 August 2019.
|
Publication(s) and related information |
Leonardo S.p.A. ASB 169-148 original issue dated 29 May 2019, Revision A dated 05 September
2019, and Revision B dated 04 February 2020.
Leonardo S.p.A. ASB 189-237 original issue dated 29 May 2019, Revision A dated 05 September
2019, and Revision B dated 04 February 2020 or Revision B dated 04 February 2020 with Errata
Corrige.
Leonardo S.p.A. SB 169-153 original issue dated 04 February 2020.
Leonardo S.p.A. SB 189-249 original issue dated 04 February 2020.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
PAD number |
20-027 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. This AD was posted on 05 February 2020 as PAD 20-027 for consultation until 19 February
2020. The Comment Response Document can be found in the EASA Safety Publications Tool, in
the compressed (zipped) file attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued
Airworthiness Information Section, Certification Directorate. E-mail: ADs@easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system.
|