| Number |
2020-0078 |
| Issued by |
 Europe |
| Issue date |
2020-03-31 |
| Effective date |
2020-04-14 |
| EASA approval number |
|
| ATA Chapter |
65 |
Approval Holder
/ Type Designation |
-
AIRBUS HELICOPTERS
-
SA/AS 365 / EC 155
-
AS 365 N2
-
AS 365 N3
-
EC 155 B
-
EC 155 B1
-
SA 365 N1
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2019-0267R1 dated 12 November 2019, including its Correction dated 13 November 2019.
|
| Publication(s) and related information |
AH AS365 ASB 01.00.71 original issue dated 24 October 2019, or Revision 1 dated 11 December 2019, or Revision 2 dated 25 March 2020.
AH EC155 ASB 04A016 original issue dated 24 October 2019, or Revision 1 dated 11 December 2019, or Revision 2 dated 25 March 2020.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
