Safety Publications Tool
2020-0094R1 : Doors – Cargo Door Locking Mechanism – Inspection
EASA approval number
EASA General Aviation & VTOL Department
/ Type Designation
This AD revises EASA AD 2020-0094 dated 28 April 2020.
The original issue of this AD superseded EASA AD 2019-0255 issued 16 October 2019.
Publication(s) and related information
AH ASB EC175-05A029 Revision 1 dated 23 March 2020. The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD.
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication. 3. Enquiries regarding this AD should be referred to the EASA Safety Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
EASA_AD_2020_0094_R1.pdf (198 kb)
EASA_AD_2020_0094.zip (1 mb)
For help on using this tool, please refer to
the help section
For any inquiry regarding ADs, please contact
the EASA AD team
To report any bug, broken link or problem with this application, please contact the
Disclaimer & copyright notice
- 2021 ©