Number |
2020-0127 |
Issued by |
Europe |
Issue date |
2020-06-04 |
Effective date |
2020-06-18 |
EASA approval number |
|
Contributor |
EASA General Aviation Department |
ATA Chapter |
30 |
Approval Holder / Type Designation |
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2019-0040-E dated 21 February 2019.
|
Publication(s) and related information |
Dassault Aviation SB F10-338 original issue dated 20 February 2019.
Dassault Aviation SB F10-339 original issue dated 12 March 2020.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
PAD number |
20-080 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. This AD was posted on 14 May 2020 as PAD 20-080 for consultation until 28 May 2020. No
comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued
Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|