Number |
2021-0173 |
Issued by |
Europe |
Issue date |
2021-07-21 |
Effective date |
2021-08-04 |
EASA approval number |
|
Contributor |
EASA Large Aeroplanes Department |
ATA Chapter |
35 |
Approval Holder / Type Designation |
-
AIRBUS S.A.S.
-
A330
-
A330-243
-
A330-322
-
A330-343
-
ELBE FLUGZEUGWERKE GmbH
-
EASA STC 10063795
-
EASA STC 10063798
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2019-0215 dated 04 September 2019.
|
Publication(s) and related information |
EFW-SB-35-0001 original issue dated 08 March 2019.
EFW-SB-35-0002 original issue dated 02 September 2019.
EFW-SB-35-0003 original issue dated 27 January 2021.
EFW-SB-35-0006 original issue dated 09 June 2021.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
PAD number |
21-089 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. This AD was posted on 21 June 2021 as PAD 21-089 for consultation until 19 July 2021.
No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system. This may include reporting on the same or similar components, other than
those covered by the design to which this AD applies, if the same unsafe condition can exist or
may develop on an aircraft with those components installed. Such components may be
installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate
(STC) or other modification.
|