Publication(s) and related information |
AH ASB EC225-71A019 original issue dated 26 February 2019, or Revision 1 dated 28 February 2019, or Revision 2 dated 21 May 2021.
AH ASB EC225-28A026 original issue dated 21 May 2021, or Revision 1 dated 06 May 2022.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs@easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|