Number |
2022-0202 |
Issued by |
Europe |
Issue date |
2022-09-27 |
Effective date |
2022-10-11 |
EASA approval number |
|
Contributor |
EASA General Aviation Department |
ATA Chapter |
|
Approval Holder / Type Designation |
-
BALLONS CHAIZE
-
CS SERIES HOT AIR BALLOONS
-
JZ SERIES HOT AIR BALLOONS
-
JZX SERIES HOT AIR BALLOONS
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes DGAC France AD F-2004-136 (EASA approval 2004-8259) dated 18 August 2004, which replaced DGAC France Emergency AD UF-2004-136 dated 29 July 2004.
|
Publication(s) and related information |
Ballons Chaize SB 5 original issue (Version 01_0) dated 05 July 2022.
The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD. |
PAD number |
22-119 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 25 August 2022 as PAD 22-119 for consultation until 22 September 2022. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|