Number |
2023-0045 |
Issued by |
Europe |
Issue date |
2023-03-03 |
Effective date |
2023-03-16 |
EASA approval number |
|
Contributor |
EASA General Aviation Department |
ATA Chapter |
05 |
Approval Holder / Type Designation |
|
Revision |
Not applicable
|
Correction |
This AD is re-published to correct an erroneous AD number.
|
Supersedure |
This AD supersedes EASA AD 2019-0153 dated 03 July 2019.
|
Publication(s) and related information |
Dassault Mystere-Falcon 200 AMM Chapter 5-40 (DMD 18740A) Revision 19 dated 15 January 2021.
The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD. |
PAD number |
23-015 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. This AD was posted on 01 February 2023 as PAD 23-015 for consultation until 01 March 2023.
No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system. This may include reporting on the same or similar components, other than
those covered by the design to which this AD applies, if the same unsafe condition can exist or
may develop on an aircraft with those components installed. Such components may be
installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate
(STC) or other modification.
|