Number |
2023-0103 |
Issued by |
Europe |
Issue date |
2023-05-23 |
Effective date |
2023-06-06 |
EASA approval number |
|
Contributor |
EASA Large Aeroplanes Department |
ATA Chapter |
53 |
Approval Holder / Type Designation |
-
AIRBUS DEFENCE & SPACE S.A.
-
C-295
-
CN-235
-
CN-235
-
CN-235-200
-
CN-235-300
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2020-0159 dated 16 July 2020.
|
Publication(s) and related information |
Airbus DS AOT-CN235-53-0004 Revision 2 dated 25 March 2020, or Revision 3 dated 16 September 2022.
Airbus DS AOT-C295-53-0004 Revision 2 dated 25 March 2020, or Revision 3 dated 19 September 2022.
Airbus DS SB235-53-0070C original issue dated 23 May 2022.
Airbus DS SB295-53-0025C original issue dated 23 May 2022.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
PAD number |
23-049 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 20 April 2023 as PAD 23-049 for consultation until 18 May 2023. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|