Number |
2024-0041 |
Issued by |
Europe |
Issue date |
2024-02-09 |
Effective date |
2024-02-23 |
EASA approval number |
|
Contributor |
EASA Environment & Propulsion Systems Department |
ATA Chapter |
05 |
Approval Holder / Type Designation |
-
ROLLS-ROYCE DEUTSCHLAND Ltd & Co KG
-
TRENT 7000
-
Trent7000-72
-
Trent7000-72C
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2023-0192 dated 07 November 2023.
|
Publication(s) and related information |
Rolls-Royce Trent 7000 TLM T-T7000-1RR, Revision 20 dated 10 December 2023.
The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD. |
PAD number |
24-003 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 11 January 2024 as PAD 24-003 for consultation until 08 February 2024. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|