Number |
2024-0144 |
Issued by |
Europe |
Issue date |
2024-07-19 |
Effective date |
2024-08-02 |
EASA approval number |
|
Contributor |
EASA VTOL Department |
ATA Chapter |
65 |
Approval Holder / Type Designation |
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2023-0190R1 dated 20 February 2024, which revised EASA AD 2023-0190-E dated 02 November 2023.
|
Publication(s) and related information |
AH Emergency ASB EC130-05A042 original issue dated 14 December 2022, Revision 1 dated
02 November 2023, or Revision 2 dated 13 February 2024, or Revision 3 dated 17 April 2024.
AH ASB EC130-65-11-0001 original issue dated 12 July 2024.
AH ASB EC130-65-11-0002 original issue dated 12 July 2024.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until 16 August 2024. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be
installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate
(STC) or other modification.
|