| Number |
2025-0021R1 |
| Issued by |
 Europe |
| Issue date |
2025-01-22 |
| Effective date |
2025-02-04 |
| EASA approval number |
|
| ATA Chapter |
72 |
Approval Holder
/ Type Designation |
-
ROLLS-ROYCE DEUTSCHLAND Ltd & Co KG
-
TRENT 7000
-
Trent7000-72
-
Trent7000-72C
|
| Revision |
This AD revises EASA AD 2025-0021 dated 21 January 2025
|
| Correction |
Not applicable
|
| Supersedure |
The original issue of this AD superseded EASA AD 2021-0169R1 dated 24 May 2024.
|
| Publication(s) and related information |
Rolls-Royce Alert NMSB TRENT 1000 72-AK449 Revision 1 dated 12 December 2019, or Revision 2 dated 05 July 2021, or Revision 3 dated 30 August 2023, or Revision 4 dated 19 December 2024.
Rolls-Royce SB TRENT 1000 72-K336 original issue 03 August 2022, or Revision 1 dated 03 October 2023.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
| PAD number |
25-002 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. The original issue of this AD was posted on 06 January 2025 as PAD 25-002 for consultation until 20 January 2025. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|
