| Number |
2025-0288R1 |
| Issued by |
 Europe |
| Issue date |
2026-06-26 |
| Effective date |
2026-07-03 |
| EASA approval number |
|
| ATA Chapter |
72 |
Approval Holder
/ Type Designation |
-
ROLLS-ROYCE DEUTSCHLAND Ltd & Co KG
-
RB211 TRENT 700
-
768-60
-
772-60
-
772B-60
-
772C-60
|
| Revision |
This AD revises EASA AD 2025-0288 dated 17 December 2025.
|
| Correction |
Not applicable
|
| Supersedure |
The original issue of this AD superseded EASA AD 2024-0130 dated 08 July 2024.
|
| Publication(s) and related information |
RR NMSB RB.211-72-AL053 original issue dated 01 May 2024, or Revision 1 dated 31 July 2025.
RR NMSB RB.211-72-L104 original issue dated 01 May 2024.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
| PAD number |
25-160 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. The original issue of this AD was posted on 20 October 2025 as PAD 25-160 for consultation
until 17 November 2025. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system. This may include reporting on the same or similar components, other than
those covered by the design to which this AD applies, if the same unsafe condition can exist or
may develop on an aircraft with those components installed. Such components may be
installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate
(STC) or other modification.
|
