| Number |
2026-0145R1 |
| Issued by |
 Europe |
| Issue date |
2026-08-11 |
| Effective date |
2026-08-18 |
| EASA approval number |
|
| ATA Chapter |
27 |
Approval Holder
/ Type Designation |
|
| Revision |
This AD revises EASA AD 2026-0145 dated 23 July 2026.
|
| Correction |
Not applicable
|
| Supersedure |
The original issue of this AD superseded EASA Emergency AD 2022-0161-E dated 04 August 2022.
|
| Publication(s) and related information |
Dassault Falcon 7X AFM DGT105608 CP0188-PUB dated 04 August 2022.
Dassault SB 7X-436 original issue dated 20 December 2017 and Rev. 1 dated 18 May 2018 (including its correction dated 15 September 2021).
Dassault SB 7X-650 original issue dated 20 March 2025 and Rev. 1 dated 27 May 2026.
Dassault Falcon 7X AFM DGT105608 Revision 26 dated 30 April 2026.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| PAD number |
26-076 |
| Remarks |
1.
If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. The original issue of this AD was posted on 18 June 2026 as PAD 26-076 for consultation until 16 July 2026. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|
