Safety Publications Tool
21-082 : Flight Controls – Horizontal Stabiliser / Actuator Bracket Attachment Bolts – Inspection / Replacement
Please feel free to send us your comments by email at
ADs [at] easa.europa [dot] eu
EASA approval number
EASA Large Aeroplanes Department
/ Type Designation
IRKUT CORPORATION JSC
For affected aeroplanes operated under EU regulation, this AD replaces FATA State of Design AD 2020-FATA-01020A-11 dated 28 July 2020 and AD 2021-FATA-01020A-02 dated 23 April 2021, which are not adopted by EASA.
Publication(s) and related information
Sukhoi RRJ-95 AMM M7.92.0AMM.000.000.EN Issue 03 Rev. 03 dated 30 June 2020. Irkut SB RRJ-55-00489- original issue dated 02 November 2020.
1. This Proposed AD will be closed for consultation on 02 July 2021. 2. Enquiries regarding this PAD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 3. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this PAD, and which may occur, or have occurred on a product, part or appliance not affected by this PAD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this PAD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
EASA_PAD_21_082.pdf (198 kb)
For help on using this tool, please refer to
the help section
For any inquiry regarding ADs, please contact
the EASA AD team
To report any bug, broken link or problem with this application, please contact the
Disclaimer & copyright notice
- 2021 ©