Please feel free to send us your comments by email at
ADs [at] easa.europa [dot] eu
|
| Number |
23-052 |
| Issued by |
 Europe |
| Issue date |
2023-04-25 |
| EASA approval number |
|
| Contributor |
EASA Environment & Propulsion Systems Department |
| ATA Chapter |
73 |
Approval Holder
/ Type Designation |
-
ROLLS-ROYCE DEUTSCHLAND Ltd & Co KG
-
TRENT 1000
-
Trent 1000-A
-
Trent 1000-A2
-
Trent 1000-AE
-
Trent 1000-AE2
-
Trent 1000-C
-
Trent 1000-C2
-
Trent 1000-CE
-
Trent 1000-CE2
-
Trent 1000-D
-
Trent 1000-D2
-
Trent 1000-E
-
Trent 1000-E2
-
Trent 1000-G
-
Trent 1000-G2
-
Trent 1000-H
-
Trent 1000-H2
-
Trent 1000-J2
-
Trent 1000-K2
-
Trent 1000-L2
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
None
|
| Publication(s) and related information |
Rolls-Royce Alert NMSB TRENT 1000 73-AK839 original issue dated 04 July 2022, or Revision 1 dated 29 March 2023.
Rolls-Royce Control Systems SB HMU1000-73-02 original issue dated 22 May 2022, or Revision 1 dated 28 March 2023.
Rolls-Royce Control Systems SB HMU1010-73-03 original issue dated 22 May 2022, or Revision 1 dated 28 March 2023.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| Remarks |
1. This Proposed AD will be closed for consultation on 23 May 2023.
2. Enquiries regarding this PAD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
3. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this PAD, and which may occur, or have occurred on a product, part or appliance not affected by this PAD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this PAD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|
