Please feel free to send us your comments by email at
ADs [at] easa.europa [dot] eu
|
Number |
24-091 |
Issued by |
Europe |
Issue date |
2024-07-23 |
EASA approval number |
|
Contributor |
EASA Large Aeroplanes Department |
ATA Chapter |
05 |
Approval Holder / Type Designation |
-
AIRBUS S.A.S.
-
A300-600
-
A300B4-601
-
A300B4-603
-
A300B4-605R
-
A300B4-620
-
A300B4-622
-
A300B4-622R
-
A300C4-605R variant F
-
A300C4-620
-
A300F4-605R
-
A300F4-622R
-
A300-600ST (Beluga)
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2022-0173 dated 24 August 2022.
|
Publication(s) and related information |
A300-600 ALS Part 1 SL-ALI Revision 03 dated 01 July 2024.
The use of later approved variations to, or revisions of, the above-mentioned document is acceptable for compliance with the requirements of this AD. |
Remarks |
1. This Proposed AD will be closed for consultation on 20 August 2024.
2. Enquiries regarding this PAD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa[dot]eu.
3. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this PAD, and which may occur, or have occurred on a product, part or appliance not affected by this PAD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this PAD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|