Please feel free to send us your comments by email at
ADs [at] easa.europa [dot] eu
|
| Number |
25-183 |
| Issued by |
 Europe |
| Issue date |
2025-12-10 |
| EASA approval number |
|
| ATA Chapter |
05 |
Approval Holder
/ Type Designation |
-
AIRBUS S.A.S.
-
A330
-
A330-201
-
A330-202
-
A330-203
-
A330-223
-
A330-223F
-
A330-243
-
A330-243F
-
A330-301
-
A330-302
-
A330-303
-
A330-321
-
A330-322
-
A330-323
-
A330-341
-
A330-342
-
A330-343
-
A330-841
-
A330-941
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
None
|
| Publication(s) and related information |
Airbus A330 ALS Part 2 Variation 7.1 dated 28 November 2024.
Airbus A330 ALS Part 2 Variation 7.5 dated 26 November 2025.
The use of later approved variations or revisions of the above-mentioned documents, or of an ALS revision which includes the content of the above-mentioned document, is acceptable for
compliance with the requirements of this AD. |
| Remarks |
1. This Proposed AD will be closed for consultation on 07 January 2026.
2. Enquiries regarding this PAD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs[at]easa.europa.eu.
3. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this PAD, and which may occur, or have occurred
on a product, part or appliance not affected by this PAD, can be reported to the EU aviation
safety reporting system. This may include reporting on the same or similar components, other
than those covered by the design to which this PAD applies, if the same unsafe condition can
exist or may develop on an aircraft with those components installed. Such components may be
installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate
(STC) or other modification.
|
