Please feel free to send us your comments by email at
ADs [at] easa.europa [dot] eu
|
| Number |
26-006 |
| Issued by |
 Europe |
| Issue date |
2026-01-16 |
| EASA approval number |
|
| ATA Chapter |
72 |
Approval Holder
/ Type Designation |
-
CFM INTERNATIONAL
-
LEAP-1A/-1C
-
LEAP-1A23
-
LEAP-1A24
-
LEAP-1A24E1
-
LEAP-1A26
-
LEAP-1A26CJ
-
LEAP-1A26E1
-
LEAP-1A29
-
LEAP-1A29CJ
-
LEAP-1A30
-
LEAP-1A32
-
LEAP-1A33
-
LEAP-1A33B2
-
LEAP-1A35A
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2018-0216 dated 08 October 2018.
|
| Publication(s) and related information |
CFM SB LEAP-1A-73-00-0050-01A-930A-D Issue 001 dated 03 January 2024.
CFM SB LEAP-1A-73-00-0051-01A-930A-D Issue 001 dated 04 July 2022, Issue 002 dated 03 January 2024 or Issue 003 dated 01 August 2024.
CFM SB LEAP-1A-73-00-0042-01A-930A-D Issue 001 dated 22 July 2020, Issue 002 dated 04 July 2022 or Issue 003 dated 11 July 2024.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| Remarks |
1. This Proposed AD will be closed for consultation on 13 February 2026.
2. Enquiries regarding this PAD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
3. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this PAD, and which may occur, or have occurred on a product, part or appliance not affected by this PAD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this PAD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|
