Please feel free to send us your comments by email at
ADs [at] easa.europa [dot] eu
|
| Number |
26-123 |
| Issued by |
 Europe |
| Issue date |
2026-10-13 |
| EASA approval number |
|
| ATA Chapter |
53 |
Approval Holder
/ Type Designation |
-
AIRBUS S.A.S.
-
A319
-
A320
-
A320-251N
-
A320-252N
-
A320-271N
-
A321
-
A321-251NX
-
A321-252NX
-
A321-271NX
-
A321-272NX
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2026-0055R1 dated 14 April 2026.
|
| Publication(s) and related information |
Airbus AOT A53N020-25 at original issue dated 16 December 2025 or Revision 01 dated 18 December 2025.
Airbus SB A320-53-1572 original issue dated 30 April 2026.
Airbus SB A320-53-1573 original issue dated 29 April 2026 or Revision 1 dated 29 June 2026.
Airbus SB A320-53-1574 original issue dated 29 April 2026.
Airbus SB A320-53-1575 original issue dated 29 April 2026.
Airbus SB A320-53-1577 original issue dated 16 July 2026.
Airbus SB A320-53-1578 original issue dated 16 July 2026.
Airbus SB A320-53-1579 original issue dated 16 July 2026.
Airbus SB A320-53-1580 original issue dated 16 July 2026.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| Remarks |
1.This Proposed AD will be closed for consultation on 27 October 2026.
2.Enquiries regarding this PAD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
3.Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this PAD, and which may occur, or have occurred on a product, part or appliance not affected by this PAD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this PAD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|
