Please feel free to send us your comments by email at
ADs [at] easa.europa [dot] eu
|
| Number |
26-141 |
| Issued by |
Europe |
| Issue date |
2026-11-18 |
| EASA approval number |
|
| ATA Chapter |
27 |
Approval Holder / Type Designation |
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
None
|
| Publication(s) and related information |
Airbus SB A350-42-P023 original issue dated 18 May 2026.
Airbus SB A350-42-P030 original issue dated 17 July 2026.
Airbus SB A350-27-P078 original issue dated 29 July 2025.
Airbus SB A350-31-P064 original issue dated 14 October 2025, or Revision (Rev.) 01 dated 02 July 2026.
Airbus SB A350-42-P022 original issue dated 01 July 2024, or Rev. 01 dated 06 February 2026.
Airbus SB A350-46-P029 original issue dated 20 January 2022.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| Remarks |
1.
This Proposed AD will be closed for consultation on 16 December 2026.
2. Enquiries regarding this PAD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
3. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this PAD, and which may occur, or have occurred on a product, part or appliance not affected by this PAD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this PAD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|