Safety Publications Tool
20-182 : WITHDRAWN - EXPLANATORY STATEMENT ATTACHED
Please feel free to send us your comments by email at
ADs [at] easa.europa [dot] eu
EASA approval number
EASA Large Aeroplanes Department
/ Type Designation
BAE SYSTEMS (OPERATIONS) LTD
This AD supersedes EASA AD 2013-0207 dated 09 September 2013.
Publication(s) and related information
BAE Systems (Operations) Ltd ISB.53-239 Revision 5 dated 02 March 2017. The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD.
1. This Proposed AD will be closed for consultation on 16 December 2020. 2. Enquiries regarding this PAD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 3. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this PAD, and which may occur, or have occurred on a product, part or appliance not affected by this PAD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this PAD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
EASA_PAD_20_182_WD.pdf (153 kb)
EASA_PAD_20_182.zip (1 mb)
For help on using this tool, please refer to
the help section
For any inquiry regarding ADs, please contact
the EASA AD team
To report any bug, broken link or problem with this application, please contact the
Disclaimer & copyright notice
- 2021 ©