You are not logged in
  Safety Publications Tool

2018-0127 : Fuel Hoses – Inspection / Replacement / Life Limit

Number 2018-0127
Issued by Europe  Europe
Issue date 2018-06-11
Effective date 2018-06-25
EASA approval number
Contributor EASA General Aviation Section
ATA Chapter 28
Approval Holder
/ Type Designation
  • DG AVIATION GmbH
    • DG-1000
      • DG-1000T
    • DG-800
      • DG-808 C
    • LS10
      • LS10-st
    • LS8
      • LS8-t
    • LS9
Revision Not applicable
Correction Not applicable
Supersedure None
Publication(s) and related information DG-Flugzeugbau GmbH TN 800/46, original issue dated 07 March 2018. DG-Flugzeugbau GmbH TN 1000/38, original issue dated 07 March 2018. DG-Flugzeugbau GmbH TN 8026, original issue dated 07 March 2018. DG-Flugzeugbau GmbH TN LS10-04, original issue dated 07 March 2018. DG-Flugzeugbau GmbH TN 9002, original issue dated 07 March 2018. The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD.
PAD number 18-070
Remarks 1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. This AD was posted on 10 May 2018 as PAD 18-070 for consultation until 07 June 2018. No comments were received during the consultation period. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.