Safety Publications Tool
leading to the decision not to take AD action similar to Federal Aviation Administration (FAA) AD 2019-24-01
leading to the decision not to take AD action similar to Federal Aviation Administration (FAA) AD 2020-01-15
2019-0055-E : SUPERSEDED BY EASA AD 2019-0253-E
EASA approval number
EASA Propulsion Section
/ Type Designation
BRP-ROTAX GmbH & Co KG
Rotax 912 iSc2 Sport
Rotax 912 iSc3 Sport
915 iSc3 A
This AD is republished to correct a typographical error in the second paragraph of the Required Action(s) and Compliance Time(s) section.
Publication(s) and related information
BRP-Rotax ASB-912 i-010 / ASB-915 i A-006 (single document) original issue dated 13 March 2019. The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD.
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. The results of the safety assessment have indicated the need for immediate publication and notification, without the full consultation process. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
EASA_AD_2019_0055_E_C1_superseded.pdf (529 kb)
EASA_AD_2019_0055_E.zip (1 024 kb)
For help on using this tool, please refer to
the help section
For any inquiry regarding ADs, please contact
the EASA AD team
To report any bug, broken link or problem with this application, please contact the
Disclaimer & copyright notice
- 2006 ©