| Number |
2019-0060 |
| Issued by |
 Europe |
| Issue date |
2019-03-20 |
| Effective date |
2019-04-03 |
| EASA approval number |
|
| Contributor |
EASA Medium Rotorcraft Section |
| ATA Chapter |
67 |
Approval Holder
/ Type Designation |
-
AIRBUS HELICOPTERS
-
AS 350 / EC 130
-
AS 350 B
-
AS 350 B1
-
AS 350 B2
-
AS 350 B3
-
AS 350 BA
-
AS 350 BB
-
AS 350 D
-
AS 355
-
AS 355 E
-
AS 355 F
-
AS 355 F1
-
AS 355 F2
-
AS 355 N
-
AS 355 NP
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2018-0287 dated 20 December 2018.
|
| Publication(s) and related information |
AH AS350 ASB 67.00.76 original issue dated 17 December 2018, and Revision 1 dated 11 March
2019.
AH AS355 ASB 67.00.46 original issue dated 17 December 2018, and Revision 1 dated 11 March
2019.
AH AS350 SB No. 67.10 Revision 1 dated 28 March 1989.
AH AS355 SB No. 67.09 Revision 2 dated 28 March 1989.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD
with Request for Comments, postponing the public consultation process until after publication.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system.
|
